Ing. Büro S. Ludescher, CH-Oftringen

Description of the software

• 'Pull down' menu driven user interface with Mouse and on-line help support.
• The help contains the operating instructions.
• Baud rate up to 115200 Baud (other baud rates are possible by changing the crystal).
• Selectable time resolution of 1.0 or 0.2 millisecond.
• Adjustable record buffer from 1000 to 150'000 data records or events (maximum depends on free memory).
• For half duplex protocols, together with the interface converter, it will need only one serial interface of the PC (Notebook).
• Display in ASCII or HEX characters.
• Status display of the RTS and CTS control lines.
• Date & time of each byte.
• Search for data pattern or buffer position.
• Intel 9 Bit multidrop protocol support (e.g. 8051 mode 3).
• Time measuring such as response time, repeat time etc.
• Evaluates values, binary or Hex LSB or MSB first:
• 8, 16, 24, 32 bit signed or unsigned integer.
• 4 byte IEEE and Siemens floating point, 2 word Modbus floating point.
• Values can be exported to make graph charts in Excel, Works, Lotus, etc.
• Trigger data pattern up to 32 bytes. Each byte can be ASCII, Hex, Binary where: Each byte, nibble, bit, ASCII hex bit can be ignored or be set to a value.
• Trigger to line level changes of RTS or CTS.
• Data error trigger such as frame or parity error.
• Trigger for an external contact.
• Trigger output to trigger a slave Protocol Analyser.
• Settable time out trigger.
• Automatic data store and/or stop on trigger.
• Display filter to show only triggered data.
• Runs on a PC 80286 or higher, DOS-5.0 or higher, Windows 3.1, 95, 98.
• Runs also under Windows ME, NT and 2000 with some limitations. Especially because these versions do not support direct hardware access. It means that half duplex mode (see full version) and 9-Bit mode is not working.

Hints to run it under Windows

File: "pa21e.zip" Size: 113 kb